PET Silicone adhesives glues
Inquiry
| Post Date: | Jul 28,2014 |
| Expiry Date: | Jan 24,2015 |
| Detailed Description: |
Quantity: 1000Metric Tons Specs:PET Silicone adhesives ,silicone glues Price:21.3 USD Metric Tons Payment Method: T/T ,Western union Adhesive for PET Film KL-2620A/B/C/D KL-2620A/B/C/D is four components compound. Heat and fast cured type for silicone adhesive,no primer needed.Good flowing capability before cured ,The cured silicone adhesive has a good adhesion to stick with PET base material and improving the surface Stripping Resistance. After cured,has good adhesion strength, excellent exhaust,high transparency, no adhesive residue, high temperature resistant, high humidity, can directly replace the same level products of Dow Corning and KCC products. The silicone adhesives are characterized by good leveling property, electrical insulating property, and high grade of transparency and easy to clean with water. Mainly applied to the computer display screen, mobile phone screen protector, PET touch screen film series.Can be coated to PET film by lamination machine. Physical Properties: Appearance And Component： 2620A:Transparent colloid containing platinum catalyst. 2620B:Transparent silica gel 2620C:Tackifier(Increase the adhesion between PET film and silicone adhesive) 2620 D:pressure sensitive adhesive (increase D component ratio can increase the silicone surface stripping force) Viscosity： <50000mpa.s Solid Content： 60% Curing Condition: TC10：19S*150℃ TC90：42S*150℃ Stored Condition: Room temperature Light Transmittance: 94% Refractive index (sodium yellow light wavelength 5893 10 ^ - 10 meters) : 1.48 Application Method: Shenzhen Kanglibang Science and Technology Co., Ltd. Product Information Add: H Building, XinWei 3rd industrial area, DaLang Street, LongHua Town, Baoan District , Shenzhen City 518000, Guangdong Province, China Tel: +86-0755-81478876 ext 8019 Fax: +86-0755-81478372 MP: +86 13418600863 Email:sales777@klbsilicone.com Website:www.klbsilicone.com (for example, coated 10 microns stripping force 3g/25 mm) 1. Solid content 24% ,mixing uniformity with solvent by a ratio of A:B:C:D :Solvent =100:100:10:40:560 Solid content 35% ,mixing uniformity with solvent by a ratio of A:B:C:D :Solvent =100:100:10:40:300 2. Taking material according to proportion, first mix B material and C and solvent evenly, and then mixed with A material evenly for about 20 minutes. 3. Defoaming treatment with vacuum by requirements. Coating uniformity of silicone adhesive on the silicone or PET film surface by coating method. 4. Testing at laboratory baking for 2~3 minutes at 150℃. For producing Baking temperature depend on coating thickness. Ranging from 90℃ to 160℃. For 10μm takes about 50～60 seconds. Reference Data Table: * ★The more means the exhaust ability better. * The stripping force is in the film thickness of 50 microns, measured the thickness of the cured adhesive 20±3μm, stripping force related to the thickness of cured adhesive . *This data is for reference only, actual stripping force is related to the production process, please refer to our actual measurement. 2620A 10 0 100 100 100 100 10 0 2620B 10 0 100 100 100 100 10 0 2620C 10 10 10.5 11 11.5 12 2620D 0 20 80 100 120 13 0 Stripping resistance (g/25mm) 0- 1 1-3 5-8 10-1 5 18-22 25 -3 0 Bubble resistance ★★★ ★★☆ ★★☆ ★☆ ☆☆ ☆ Note: 1. The application ratio should be adjusted appropriate to different materials, the thickness of coating and weather conditions (temperature and humidness). The application ratio should better increase 5%~10% based raw ratio at hot and humid conditions. 2. Cleaning base materials and keep it dry, free of dust and oil. Solvent requirement : mixed solvent is needed , Toluene :ethyl ketone=1:1, Or Xylene :ethyl acetate :cyclohexanone=80:15:5 3. Controlling and checking the viscosity during the coating process. Pay attention to the quantity for once and make it deeply cured. 4. Keep in a good and suitable condition for coating. The working shop should be dust-free at 25～35℃ and humidity controlled in 15 ~ 60%. Much over dust will cause NG products, Low over temperature will cause bad leveling property and adhesion strength, Large over humidity will cause shrinkage cavity of film. Low over humidity will cause potential safety hazard and whity by static. 5. The mixed silicone adhesive should be used up within 1 hour, if high viscosity happens, stop coating at once. 6. The work shop should be ventilated and workers should wear labor protection tools during the coating process. Away from open flame, high temperature and pay attention to static electricity. 7. Please read the product safety instructions before using. Storage: Stored at room temperature for 6 months without mixing. Packing: A:25KG/Barrel、50KG/Barrel 180/Barrel B:20KG/Barrel、50KG/Barrel 180/Barrel C:4KG/Barrel、20KG/Barrel D:20KG/Barrel、50KG/Barrel 180/Barrel Shenzhen Kanglibang Science and Technology Co., Ltd. Product Information |
| Company: | Shenzhen Kanglibang Science Technology Co.,Ltd [ China ] |
| Contact: | michael |
| Tel: | +86-0755-81478018 |
| Fax: | +86-0755-81478372 |
| Email: | klbsales009@163.com |
-
Disclaimer statement:The information and data included above have been realized by the enterprises and compiled by the staff, and are subject to change without notice to you. The Chemnet makes no warranties or representations whatsoever regarding the facticity, accuracy and validity of such information and data. In order to ensure your interest, we suggest you chose the products posted by our gold suppliers or VIP members.
